Windows 10 Slow After an Update? Here’s How You Can Fix It

The practical value of Windows updates cannot be overstated. But as useful as these updates are, they can also make your computer slow down after you’ve installed them.

If you too are facing the «Windows 10 slow after update» issue, these tips should help you troubleshoot the problem and get it back to its original state.

Before we jump into the method, however, let’s look at the possible causes of things making your computer slow down after the Windows 10 update.

Windows 10 Slow After Update? Here’s the Cause

Windows 10 updates are good. In fact, they are your first line of defense against harmful malware and viruses, even before you install a good antivirus software.

They protect your computer against malware and viruses created daily. So an update not only plugs security flaws, but also patches any bugs that make applications crash—in a nutshell, then, every update aims to make your computer function better.

What then causes your computer to run slow after a Windows update?

Through our research, we have found these to be the top causes that result in a slow computer after Windows update:

  • A buggy update
  • Corrupt system files
  • Background apps

So these are a few things that you need to be careful about if you want to avoid another Windows disaster. Don’t worry about this one, though; by the end of this article, you’ll be able to fix the «slow Window 10 after the update» issue for good.

MAKEUSEOF VIDEO OF THE DAY

Methods to Fix Slow Down of Windows 10 After Update

Whatever the cause of the slowdown of your Windows 10 computer, if you follow the methods listed in this guide to the end, you will not face the slow Windows 10 problem again.

1. Roll Back the Windows Update

If new updates have caused the slowdown of your Windows 10, then rolling back these updates should do the trick. Microsoft has a built-in method by which you can achieve this.

To uninstall the updates, go to Settings > Update & Security > Windows Update > View update history.

Next, click on Uninstall updates. There, you’ll see a list of all the installed updates. You can then uninstall the updates that you believe have caused the problem.

In this way, you can uninstall the updates that have slowed down your Windows 10.

2. Repair Corrupt or Damaged Files

Sometimes due to updates getting stuck in between due to a network or similar issue, your crucial Windows files might end up corrupted or damaged.

This can make your system act unpredictably. You can repair the damage through the System File Checker, a free tool developed by Microsoft that comes in handy for corruption issues such as this one. The tool works by scanning your entire PC and then repairing whatever issues it can.

To run the System File Checker, you have to use the command prompt. Follow the steps listed below to get started:

  1. Go to the Start menu search bar, type in ‘command prompt’.
  2. Run the Command prompt as an administrator.
  3. In the Command prompt, type sfc /scannow and hit Enter.

After the scan is complete, reboot your system. If the Windows 10 update did cause any corruption problems, they will be resolved after following this method.

Run the DISM Command

If the SFC command fails to recover your files, use the Deployment Image Servicing and Management (DISM) command. This is another Windows diagnostic tool created by Microsoft, but a more powerful one than SFC.

The DSIM command works by repairing your Windows system image files. To run this command, open the Command prompt with the administrator privileges, as we did above. Run the DISM /Online /Cleanup-Image /CheckHealth command to check if the image is corrupted.

If there are no corruption issues, you can run a more advanced scan through the Dism /Online /Cleanup-Image /ScanHealth command:

Note that this process may take a while. If you find corruption issues through the above step, run the Dism /Online /Cleanup-Image /RestoreHealth command to download and replace the damaged files.

Restart your computer after the command gets executed; run the SFC command again to repair the errors.

3. Disable Background Apps

Another popular method to resolve a slow Windows 10 after an update is to disable all the unnecessary background apps.

As you know, Windows 10 comes with many pre-installed apps apart from the ones that you download. These apps will keep running in the background—even when you are not using them. They don’t need to, though, as a good percentage of these apps are not really required for the functioning of Windows 10.

And the downside of this is that the apps eat away your CPU resources (RAM, cycles, etc.), which otherwise would have been free, leaving your computer slower than usual.

It is, therefore, helpful to terminate the unnecessary apps, and see if doing so results in a performance boost. Here’s how you can do that:

  1. Open the Windows Settings.
  2. Then, click on Privacy > Background Apps.
  3. Choose which apps can run in the background section, turn-off all the unimportant apps.

Reboot your computer, and this will result in a normal computer speed.

4. Perform a Clean Boot

A clean boot is performed by starting a computer with minimum drivers and start-up applications; this helps in identifying the new applications that are causing the problems in your system.

Here’s how you, too, can do a clean boot:

  1. In the Start menu search bar, type in ‘msconfig,’ and select System Configuration App.
  2. In the Services tab, select Hide all Microsoft Services, and then click on Disable All.
  3. Under the Startup tab, click on Open Task Manager.
  4. In the Startup section, select and disable all the apps listed here one by one. You can also right-click on the background process and select Disable from the menu.
  5. Close the Task Manager.
  6. On the Startup tab of System Configuration, click on OK.

After performing all the above steps, you’re good to get started with the clean boot. Simply reboot your PC and the clean boot will begin.

5. Run Windows System Restore

System Restore is a free tool that works by taking your Windows to point in time wherever worked fine. It is frequently called upon on during a bug or malfunction in your Windows and you need to revert to a state where everything was functioning. Here, the System Restore can be used to take your Windows settings to the state preceding the update.

Follow the steps below to get started:

  1. In the Start menu search bar, type in ‘system restore,’ and select Create a restore point.
  2. A System Properties dialog box will appear.
  3. Select System Protection and click on System Restore.

    Note: If you cannot click on this button, then your system doesn’t have a restore point yet, and thus, you cannot restore it.

  4. Click on the Next button.
  5. Pick a restore point and click on Scan for affected programs to confirm the apps that will be removed.
  6. Click on Next to get started with the restore.
  7. Finally, click on Finish.

After the restoration is complete, your system will be restored to its initial condition at the time of the last backup.

Note: The last resort for the slow Windows 10 issue is to use the Windows Factory Reset and start from scratch. Be warned though, as this is a nuclear option that will take your computer to the original, fresh state when you bought it.

Windows 10 Slow After Update Error Resolved

Facing a computer slow down after a Windows 10 update is a big nuisance; one that you might face one day as well. Hopefully, one of the methods listed above restored your PC back to its original performance. The solutions don’t stop here, though, as there are other ways to speed up your PC and improve its performance.

14 Ways to Make Windows 10 Faster and Improve Performance

It’s not hard to make Windows 10 faster. Here are several methods to improve the speed and performance of Windows 10.

Read Next

About The Author

Servicio técnico Teveo Tecno

Entradas recientes

Cómo reiniciar los Joy-Cons de Nintendo Switch

Cuando tus Joy-Cons empiezan a dar problemas de conexión, reiniciarlos es tu mejor opción. La…

2 años hace

¿Safari sigue fallando en el Mac? 5 formas de solucionarlo

Safari es el navegador preferido por casi todos los usuarios de Mac. Funciona bien y…

2 años hace

7 formas útiles de utilizar la aplicación de accesos directos en tu Mac

Si eres un usuario de Mac relativamente antiguo, puede que no te hayas dado cuenta…

2 años hace

¿Debes actualizarte a macOS Ventura? Así es como se decide

macOS Ventura está repleto de increíbles funciones y mejoras, como Stage Manager, Continuity Camera, Freeform…

2 años hace

6 formas de solucionar el error de SSD no reconocido en Windows 10

Las unidades de estado sólido (SSD) tienen enormes ventajas sobre los discos duros magnéticos tradicionales,…

2 años hace

7 maneras de arreglar las imágenes que no se cargan en Google Chrome

Aunque Google Chrome es uno de los navegadores web más populares, no está libre de…

2 años hace